Hybrex Optional Equipment

Hybrex Business Telephone Systems Small to Large Business Telephone Systems

Hybrex Access Control Phone

The ACP (Access Control Phone) is a doorphone like device with many more functions than your average doorphone. Designed for use in sheltered or indoor situations the ACP is a digital system device fed by single pair from any Hybrex G series system.

The functionality of the ACP is manyfold: it provides an audio path to extensions or external lines, RFID detector for proximity card, relay to open the door or activate a siren and a sensor to detect alarm status. The ACP has many different combinations: such as a door phone at front or back door, normal wall mount phone with handsfree answer back, two-way speaker, security control panel and access control device. Using a 4 character x 7 segment large format display the ACP shows key/operation status during use, otherwise displaying the current time.

Used in conjunction with the Access Manager component of the CTStar software suite the ACP provides an elegant solution to security, access control, and pertinent record logs, for your business or home.

Hybrex DK-DPU-1 Door Phone

The Hybrex DK-DPU-1 doorphone is a standard one button doorphone. Designed for the Hybrex G series it is a digital device running on a single pair from the main equipment and has relay contacts to control a doorlock solenoid.

An attractive feature of the DK-DPU-1, apart from its use of current digital technology, is that it is weatherproof.

Built in a cast aluminium case with a silver-grey hammertone enamel finish, the componentry of this doorphone is gasketed and sealed against the ingress of moisture, for many years trouble free service.

Hybrex P8-GWD GSM Router
Feature Implementation
Transmission Voice, SMS
Frequency bands Dual Band EGSM900 and GSM1800 (GSM Phase 2+)
Transmit power Class 4 (2W) for EGSM900
Class 1 (1W) for GSM1800
Temperature range Normal operation: 0-C to +45-C
Restricted operation: +55-C to +70-C and -0 to -25-C
Storage: -10-C to +85-C
Speech codec Triple rate codec: . Half Rate (ETS 06.20).
Full Rate (ETS 06.10).
Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80)
SMS MT, MO, CB, Text and PDU mode
DATA Transmission rates: 2.4, 4.8, 9.6 kbps, non-transparent
FAX Group 3: Class 1, Class 2
Supported SIM card 3V/1.8V (Please note that 1.8V support requires to be separately tested andvalidated according to GSM 11.10)
Phone Port (FXS) DTMF Receiving
Polarity Reversal for disconnecting signal
Bellcore FSK CLI signal
RS232 V.24
Selectable baud rate 300bps ... 115kbps
Tired of the high cost of calls to mobile numbers from your business network? Your LCR (least cost routing) armoury is now complete with the addition to your network of the Hybrex P8-GWD GSM Router. Designed to convert fixed line calls to mobile calls the P8-GWD is ideal for small to large business with reduced communication costs in mind.

The Hybrex P8-GWD operates in the GSM 900 MHz and GSM 1800 MHz frequency bands providing an easy radio connection for voice and data transmission as the mobile trunk for your PABX/KTS system, or as a fixed "mobile" telephone for home use.

Key Highlights:
  • Economy and Efficiency:
    • Use the low call charge rate for mobile phone to mobile phone network from your fixed line device - such as PABX/KTS or standard telephone.
  • Easy Installation:
    • The small size of the router requires very little space for installation.
  • Low Maintenance:
    • Solid-state design minimizes trouble and eliminates periodic maintenance.
    • Expansion is easy and modular.
  • Call ID Generation:
    • The P8-GWD converts the GSM digital caller ID signal to the standard FSK Caller ID signal for fixed line use.
  • Polarity Reversal Generation:
    • The P8-GWD if required can convert the GSM digital disconnection signal to a polarity reversal signal for fixed line use to enable quick disconnection.
  • SMS - Short Message Service (Optional):
    • The P8-GWD can send and receive SMS, via its RS232 port, to the mobile network.
Mechanical Specifications (Key Service Unit):
  • CABINET DIMENSIONS (Without Antenna)
    • 210mm W x 28mm D x 107mm H (8.27" x 1.10" x 4.21")
    • 210mm W x 46mm D x 163mm H (8.27" x 1.81" x 6.42")
    • 1 Kg (2.205 lbs)
Hybrex Voicemail Card (VMU)

The Hybrex Voicemail Card (VMU) provides for economic voicemail integration in Hybrex digital systems.

The VMU is a 4 port device, available in 2, 4, or 10 hr versions, that as well as providing voicemail for your system, also provides Auto Attendant capability. A programmable feature of Hybrex systems the interactive Auto Attendant reduces incoming call handling requirements and includes the sub function of automatic call diversion (ACD) or operator overflow.

Expansion of voicemail capacity in Hybrex digital systems is progressive according to model : G2-832 - 1 VMU card capacity, G2-1648 - 2 VMU card capacity, GDS series - 2 VMU cards per cabinet.

Hybrex Backup Batteries

Housed in a convenient and attractive case these backup batteries will keep your phone system running in the event of a mains power failure.

Two cases are required per main equipment unit (KSU). Each case contains two 12 volt 7 amp/hour sealed lead acid (SLA) batteries for maintenance free operation. Charged by the main equipment the battery set, from a full charge state, will keep the attached system and its handsets operational for a minimum of 1 hour for a fully loaded fully configured system.

The alternative - should the system not be battery backed, in the event of a mains failure, a number of PSTN trunks can be configured to failover to standard analog handsets or other (non mains powered) equipment to maintain a telephone service. However any calls in progress not on the failover trunks will be lost at the time of failure.